|
DYKEM Action Marker
|
The dye-based
DYKEM® Action Marker®
is the solution for your ink marker needs. This valve-action marker features a fiber tip for marking on smooth surfaces. When not in use, the clip cap makes it easy to secure the marker in your pocket or on a clip board. The DYKEM® 44 style marker features a threaded end that can be screwed into a jig or apparatus for a continuous identification application.
Action Marker
Fine Line
|
|
|
|
DYKEM Brite Mark
|
DYKEM® BRITE MARK
markers are a general purpose permanent marker ideal for making clear, bold markings on almost any surface. The quick drying, oil-based paint withstands indoor and outdoor conditions without fading, chipping or losing its opacity. The DYKEM® Brite Mark marker can be used to permanently identify inventory, assemblies, tools, finished products or works in-progress while resisting most work related abuses or compounds.
40
Fine Point
Medium Point
|
|
|
|
DYKEM Dalo
|
The
DYKEM® DALO®
textile markers easily write through oil, grease and even underwater. They feature a stainless steel-ball tip so you’ll never have to worry about the tip wearing out before the paint is gone, even if you’re writing on rough concrete or rusty metal. The thick, bold paint markings withstand extreme weather conditions without losing legibility or brightness.
Action Marker
Fine Line
Textile Markers
|
|
|
|
DYKEM High Purity
|
DYKEM® High Purity
markers are your answer for marking on stainless steel or any surface where degradation, contamination or other adverse effects are a concern. The formula contains trace amounts of halogens, low melting metals and is low in chlorides. This precise formulation meets or exceeds the requirements of the US Energy Research & Development Administration’s “Nuclear Grade” for black, red, yellow and white inks
44
Fine Line
Texpens
|
|
|
|
DYKEM High Temperature
|
|
Specially formulated,
DYKEM® High Temperature markers ideal for marking on surfaces that are exposed to extreme high temperature environments. Apply to a nonporous surface and the marks will become fused and permanent after heat is applied, even on surfaces that reach up to 2000°F (1093°C).
33
44
Texpens
|
|
|
|
DYKEM Rinz Off
|
The
DYKEM® RINZ OFF
®
Detergent Temporary Marker allows you to make a mark on untreated metal and remove it with water; a solvent is not required. Marks made on untreated metal will rinse off with water and no ghosting or bleed-through will appear when painted over.* The soft, fiber tip ensures the surface of the metal will not be scratched or marred and can easily be replaced until the marker runs out of ink.
HD 44
Medium Point
|
|
|
|
DYKEM Staining Colors
|
|
The
DYKEM® Staining Colors provide quick identification on a variety of component parts. These stains adhere without flaking and scaling allowing them to repel oils. DYKEM® Staining Colors are easily applied by brushing, spraying, and dry quickly to the touch. Transparent, Opaque, Temporary, and Fluorescent stains are available.
Opaque Stains
Transparent Stains
|
|
|
|
DYKEM Steel Blue Layout Fluid
|
Machine shop operators depend on
DYKEM® Blue Steel Layout Fluid
to scribe sharp, clear, precise lines. When applied, our layout fluids provide a uniform deep color that prevents glare and dries in minutes. All DYKEM® Steel Blue Layout Fluids create an extremely thin film which adds practically no thickness to the work piece and remains flexible without cracking and chipping.
Steel Blue Layout Fluid
|
|
|
|
Dykem Strike Mark
|
DYKEM
® STRIKE-MARK™ is an ink based permanent marker. This valve action marker features a fiber tip and an industrial strength ink ideal for permanant identification of parts or accessories. The clear, crisp marks resist fading even when subjected to varying extreme climates and dries in seconds.
Fine
Medium
|
|
|
|
DYKEM Sudz Off
|
The
DYKEM® SUDZ OFF
®
Detergent Removable Temporary Marker allows you to make a mark on untreated metal and remove it using an alkaline detergent with a pH level of 10 or above; a solvent is not required. Marks made on untreated metal will not ghost or bleed-through when painted over* The soft, fiber tip ensures the surface of the metal will not be scratched or marred and can easily be replaced until the marker runs out of ink.
HD 44
Medium Point
|
|
|
|
DYKEM Texpens
|
The
DYKEM® TEXPEN
®
is a smaller version of the DYKEM® DALO®, and both perform equally well in demanding situations. These markers easily write through oil, grease and even underwater. They feature a stainless steel-ball tip so you’ll never have to worry about the tip wearing out before the paint is gone, even if you’re writing on rough concrete or rusty metal. The thick, bold paint markings withstand extreme weather conditions without losing legibility or brightness.
Broad Point
Fine Point
Medium Tip
Texpen Scour Out
|
|
|
|
DYKEM TUFF GUY
|
The dye-based
DYKEM® TUFF GUY
®
(formerly Action Marker HD) is a heavy-duty, truly permanent ink marker which is xylene-free. This valve-action marker features a fiber tip and an industrial strength ink ideal for permanent identification of packaging materials, parts or accessories. The clear, crisp marks resist fading even when subjected to varying, extreme climates. DYKEM® TUFF GUY markers won’t rub off slick surfaces like plastics and shrink wrap.
Tuff Guy
|
|
|
|
DYKEM Ultraviolet
|
|
The
DYKEM® Ultraviolet marker's invisible, opaque, dye-base ink is only seen when placed directly under a black light. This is great for marking surfaces with information that will not be visible in normal light. The DYKEM® Ultraviolet marker marks on plastic, glass and nonporous surfaces.
Ultraviolet
|
|
|
