AMERICAN SPECIALTIES PROFILE DRYER 0180 WHITE ASI 0180


	You have 0 item(s) in your cart

Total: $0.00
View Cart - Checkout

Janitorial & Industrial

Office

Furniture

Food Service

Sheds & Outdoor

Call Us Toll-Free at: 1-877-894-4884

American Specialties Profile Dryer 0180 White
ASI 0180 by American Specialties Inc.

• 10" H x 14" W x 4" D

Description:
PROFILE TM DRYER: The first surface-mounted dryers to conform to ADA projection requirements. Powerful, dual jets of warm air dry hands in less than 25 seconds.

Dimensions:
(Conforms to ADA) 10" H x 14" W x 4" D (254mm H x 356mmWx 100mmD)
• Quick drying—under 25 seconds;
• no touch—energy efficient operation;
• universal voltage—automatically adjusts to most power conditions;
• modern design and durable;

Specification:
- Profile TM Dryers. Dryer shall be surface mounted one piece stamped steel or stainless steel cover.
- The steel cover shall be 16 gauge (1.5mm); the stainless steel cover shall be 18 gauge (1.3mm).
- The steel cover shall be finished with an acid-resistant porcelain enamel finish and the stainless steel cover shall have satin or bright finish.
- This surface mounted dryer shall not protrude more than 4” 102mm) from the wall and shall comply with ADAAG requirements.
- The motor shall be a 1/4 HP 7500 RPM dual shaft brush type. The dryer shall have two blower housings, two fans, and two totally enclosed heating elements.
- The unit shall send 183 cubic feet per minute of warm air through two directional tamper-resistant air exits and be protected by automatic resetting thermal protection
device.
- The unit shall have hands-free automatic stop/start infrared circuitry and self adjusting timeout and fail safe “off” protection.
- The entire unit shall be internally grounded and shall have universal voltage circuitry allowing it to operate at input voltages of 100 to 240 VAC- 50/60 Hz. It shall be UL, CSA, EN, and CE listed.

color: white